We – EPG Group the most significant agricultural gearbox and pto manufacturing unit in China with 5 diverse branches. For a lot more particulars: Cell/whatsapp/telegram/Kakao us at: 0086-13083988828
new holland haybine pto shaft The peugeot 106 driveshaft business pto shaft hazard was big moe’s generate shaft certified agricultural pto shaft makers by pto generate shaft tractor ISO9001:2008 pto drive shaft sequence Top quality sequence 5 pto shaft with slip clutch Administration vw t5 generate shaft Program. ag pto shaft areas “EPG” brand name rotocultivator ploughshares in T.S. total strains developed in our manufacturing facility have been examined and appraised by the Ministry of Agriculture and have obtained the license of popularizing farm equipment promulgated by the Ministry of Agriculture of the People’s Republic of China.
LM plum Blossom Elastic shaft coupling(GB/T5272-2002)
Plum elastic coupling has the characteristics of vibration reduction, buffering, little radial measurement, no lubrication and simple maintenance. Suited for starting frequency, positive and damaging rotation, medium and low speed, medium and modest electrical power transmission.Not suited for large masses and frequent replacement of elastic elements.
The composition of plum elastic coupling is basic.But when the elastic element is replaced, the 50 % coupling shall be moved axially.LMS type is straightforward to substitute the elastic element without having having to go the fifty percent coupling.
Basic Parameter And Principal Dimension(GB/T5014-two hundredthree)
Type |
Nominal torque(Tn/N·m) |
Pace(Np) |
Shaft hole diameter (d1,d2,dz) |
Duration of shaft gap |
LO |
D |
D1 |
Type of elastic areas |
Mass |
Rotary inertia |
Hardness of elastic parts |
LM |
LMD,LMS |
Y variety |
J1,Z variety |
L (suggest) |
LM |
LMD |
LMS |
LMD,LMS |
LM |
LMD |
LMS |
LM |
LMD |
LMS |
a/HA |
b/High definition |
L |
80+five |
sixty+five |
r·min-1 |
Mm |
kg |
kg·mtwo |
LM1 LMD1 LMS1 |
25 |
45 |
15300 |
8500 |
12,14 |
32 |
27 |
35 |
86 |
ninety two |
98 |
50 |
ninety |
MT1-a -b |
.sixty six |
one.21 |
one.33 |
.0002 |
.0008 |
.0013 |
16,18,19 |
forty two |
30 |
20,22,24 |
fifty two |
38 |
twenty five |
62 |
forty four |
LM2 LMD2 LMS2 |
fifty |
a hundred |
1200 |
7600 |
16,18,19 |
42 |
thirty |
38 |
95 |
one zero one.5 |
108 |
sixty |
a hundred |
MT2-a -b |
.ninety three |
one.65 |
1.seventy four |
.0004 |
.0014 |
.0571 |
20,22,24 |
fifty two |
38 |
twenty five,28 |
sixty two |
forty four |
30 |
82 |
sixty |
LM3 LMD3 LMS3 |
a hundred |
200 |
10900 |
6900 |
20,22,24 |
52 |
38 |
forty |
103 |
a hundred and ten |
117 |
70 |
one hundred ten |
MT3-a -b |
one.forty one |
two.36 |
two.33 |
.0009 |
.0571 |
.0034 |
25,28 |
sixty two |
44 |
thirty,32 |
82 |
sixty |
LM4 LMD4 LMS4 |
a hundred and forty |
280 |
9000 |
6200 |
22,24 |
fifty two |
38 |
forty five |
114 |
122 |
a hundred thirty |
85 |
one hundred twenty five |
MT4-a -b |
2.18 |
three.56 |
3.38 |
.002 |
.005 |
.0064 |
25,28 |
62 |
forty four |
thirty,32,35,38 |
eighty two |
60 |
40 |
112 |
eighty four |
LM5 LMD5 LMS5 |
350 |
400 |
7300 |
5000 |
twenty five,28 |
62 |
forty four |
50 |
127 |
138.5 |
one hundred fifty |
one hundred and five |
one hundred fifty |
MT5-a -b |
3.sixty |
6.36 |
six.07 |
.005 |
.0135 |
.0175 |
thirty,32,35,38 |
82 |
sixty |
forty,42,forty five |
112 |
eighty four |
LM6 LMD6 LMS6 |
400 |
710 |
6100 |
4100 |
30,32,35,38 |
82 |
sixty |
55 |
143 |
155 |
167 |
185 |
185 |
MT6-a -b |
six.07 |
10.77 |
ten.forty seven |
.0114 |
.0329 |
.0444 |
40,42,45,forty eight |
112 |
84 |
LM7 LMD7 LMS7 |
630 |
1120 |
5300 |
3700 |
35*,38* |
eighty two |
sixty |
60 |
159 |
172 |
185 |
205 |
205 |
MT7-a -b |
nine.09 |
15.30 |
14.22 |
.5712 |
.0581 |
.571 |
40*,42*,45,forty eight,fifty,fifty five |
112 |
eighty four |
LM8 LMD8 LMS8 |
1120 |
2240 |
4500 |
3100 |
forty five*,forty eight*,50,fifty five,fifty six |
112 |
eighty four |
70 |
181 |
195 |
209 |
a hundred and seventy |
240 |
MT8-a -b |
thirteen.56 |
22.72 |
21.16 |
.0468 |
.1175 |
.1493 |
sixty,63,sixty five |
142 |
107 |
LM9 LMD9 LMS9 |
1800 |
3550 |
3800 |
2800 |
fifty*,55*,56* |
112 |
eighty four |
80 |
208 |
224 |
240 |
200 |
270 |
MT9-a -b |
21.forty |
34.44 |
30.70 |
.1041 |
.2333 |
.2767 |
sixty,sixty three,65,70,71,75 |
142 |
107 |
eighty |
172 |
132 |
LM10 LMD10 LMS10 |
2800 |
5600 |
3300 |
2500 |
sixty*,sixty three*,sixty five*,70,seventy one,seventy five |
142 |
107 |
ninety |
230 |
248 |
268 |
230 |
305 |
MT10-a -b |
32.03 |
51.36 |
forty four.55 |
.2105 |
.4594 |
.5262 |
eighty,85,90,95 |
172 |
132 |
one hundred |
212 |
167 |
LM11 LMD11 LMS11 |
4500 |
9000 |
2900 |
2200 |
71*,seventy one*,seventy five* |
142 |
107 |
a hundred |
260 |
284 |
308 |
260 |
350 |
MT11-a -b |
49.fifty two |
81.30 |
70.seventy two |
.4338 |
.9777 |
one.1362 |
80*,85*,90,95 |
172 |
132 |
100,one hundred ten,120 |
212 |
167 |
LM12 LMD12 LMS12 |
6300 |
12500 |
2500 |
1900 |
eighty*,eighty five*,ninety*95 |
172 |
132 |
115 |
297 |
321 |
345 |
three hundred |
400 |
MT12-a -b |
seventy three.forty five |
a hundred and fifteen.53 |
99.54 |
.8205 |
one.751 |
one.9998 |
one hundred,a hundred and ten,one hundred twenty,one hundred twenty five |
212 |
167 |
one hundred thirty,one hundred forty,150 |
252 |
202 |
LM13 LMD13 LMS13 |
11200 |
2000 |
2100 |
1600 |
ninety*,95* |
172 |
132 |
125 |
323 |
348 |
373 |
360 |
460 |
MT13-a -b |
103.86 |
161.seventy nine |
137.fifty three |
one.6718 |
3.667 |
three.6719 |
a hundred*,one hundred ten*,one hundred twenty*,125* |
212 |
167 |
a hundred thirty,one hundred forty,a hundred and fifty |
252 |
202 |
LM14 LMD14 LMS14 |
12500 |
25000 |
1900 |
1500 |
one hundred*,a hundred and ten*,one hundred twenty*,one hundred twenty five* |
212 |
167 |
a hundred thirty five |
333 |
358 |
383 |
400 |
five hundred |
MT14-a -b |
127.fifty nine |
196.32 |
one hundred sixty five.twenty five |
2.499 |
four.8669 |
five.1581 |
a hundred thirty*,a hundred and forty*,a hundred and fifty |
252 |
202 |
160 |
302 |
242 |
Note:
one.Mass and rotary inertia are the approximation calculated in accordance to the advised least axial hole.
2.Diameter of shaft hole with* can be utilised for Z variety shaft hole.
three.a.b is the code for two distinct materia EPT and hardness of elastic parts.
Solution Screen
♦Other Goods List
Transmission Machinery Parts Name |
Product |
Common Coupling |
WS,WSD,WSP |
Cardan Shaft |
SWC,SWP,SWZ |
Tooth Coupling |
CL,CLZ,GCLD,GIICL, GICL,NGCL,GGCL,GCLK |
Disc Coupling |
JMI,JMIJ,JMII,JMIIJ |
Substantial Adaptable Coupling |
LM |
Chain Coupling |
GL |
Jaw Coupling |
LT |
Grid Coupling |
JS |
♦Our Company
Our business materials diverse varieties of merchandise. High quality and reasonable price tag. We adhere to the theory of “top quality very first, provider very first, steady improvement and innovation to meet the consumers” for the management and “zero defect, zero problems” as the top quality objective. To EPT our services, we give the merchandise with very good high quality at the realistic price.
Welcome to personalize products from our factory and you should provide your design drawings or contact us if you need other demands.
♦Our Companies
1.Design Providers
Our design and style crew has knowledge in cardan shaft relating to item layout and improvement. If you have any wants for your new solution or desire to make additional enhancements, we are here to offer you our help.
two.Solution Companies
raw materia EPT → Reducing → Forging →Rough machining →Shot blasting →Heat treatment method →Testing →Fashioning →Cleaning→ Assembly→Packing→Shipping
three.Samples Process
We could build the sample according to your need and amend the sample continuously to fulfill your need to have.
4.Research & Advancement
We usually investigation the new wants of the industry and develop the new product when there is new vehicles in the marketplace.
5.Top quality Manage
Each and every phase should be EPT check by Professional Staff in accordance to the stHangZhourd of ISO9001 and TS16949.
♦FAQ
Q 1: Are you investing firm or maker?
A: We are a skilled company specializing in production
different sequence of couplings.
Q 2:Can you do OEM?
Sure, we can. We can do OEM & ODM for all the clients with custom-made artworks of PDF or AI structure.
Q 3:How extended is your shipping and delivery time?
Usually it is 20-thirty days if the merchandise are not in stock. It is in accordance to quantity.
Q 4: Do you give samples ? Is it totally free or extra ?
Sure, we could offer the sample but not for free.In fact we have a very excellent cost principle, when you make the bulk get then value of sample will be deducted.
Q 5: How lengthy is your warranty?
A: Our Warranty is 12 month underneath standard circumstance.
Q 6: What is the MOQ?
A:Normally our MOQ is 1pcs.
Q 7: Do you have inspection methods for coupling ?
A:a hundred% self-inspection before packing.
Q 8: Can I have a check out to your factory just before the get?
A: Sure,welcome to visit our factory.
Q 9: What is your payment?
A:1) T/T. two) L/C
♦Get in touch with Us
Internet:
Incorporate: No.1 HangZhou Highway,Chengnan park,HangZhou City,ZheJiang Province,China