Product Description
Custom WGP Type Drum Gear Tooth Coupling Curved Tooth Pump Rigid gear coupling
Product Description
WGP Drum Gear Coupling With Brake Disc has a brake disc, brake disc can rotate speed by controlling the speed to adjust the machine. As shown in figure WGP with brake drum set type gear coupling is divided into I type and II type 2 forms, the only difference is that the brake disc is different.
Characteristics
1. Strong load-bearing capacity. Under the same outer diameter of the inner gear sleeve and the maximum outer diameter of the coupling, the bearing capacity of the drum gear coupling is increased by an average of 15-20% compared to the straight gear coupling;
2. The angular displacement compensation is large. When the radial displacement is equal to zero, the allowable angular
displacement of the straight tooth coupling is 1o, while the allowable angular displacement of the drum tooth coupling is 1o30 ‘, an increase of 50%. Under the same modulus, number of teeth, and tooth width, the allowable angular displacement of drum shaped teeth is greater than that of straight teeth;
3. The drum shaped tooth surface improves the contact conditions between the inner and outer teeth, avoiding the drawbacks of extrusion and stress concentration at the edge of straight teeth under angular displacement conditions. At the same time, it improves the friction and wear conditions of the tooth surface, reduces noise, and has a long maintenance cycle;
4. The outer gear sleeve has a CHINAMFG shaped tooth end, making it very convenient to assemble and disassemble the inner and outer teeth;
5. Transmission efficiency up to 99.7%;
Based on the above characteristics, drum shaped teeth have been widely used domestically and internationally to replace straight tooth couplings.
Product Parameters
Application
Belt conveyers, csraper conveyers, and conveyers of all kinds Bucket elevators, ball mills, hoisters, crushers, excavators, mixers, straighteners, cranes, etc.
Packaging & Shipping
Company Profile
HangZhou CHINAMFG machinery technology Co., Ltd is an industry transmission solutions manufacuturer and service provider.
We offer 1 stop solution for power transmission products for different factories, such as chemicals, energy, material handling, environmental, extraction, pulp and paper, steel and metal, food and beverage, and construction industries.
We supply: Customised gears, Small gearmotors, Industrial gearboxes, Motors, Brand product sourcing.
Our industrial Gear, Gearbox, gearmotor and motor are sold to more than 30 countries. High quality, good price, in time response and sincere service are our value and promises. We aim at making happy cooperation with our customers, bring them reliable and comfortable service.
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
How Do Rigid Couplings Compare to Other Types of Couplings in Terms of Performance?
Rigid couplings offer specific advantages and disadvantages compared to other types of couplings, and their performance depends on the requirements of the application:
1. Performance: Rigid couplings provide excellent torque transmission capabilities and are best suited for applications that demand precise and efficient power transfer. They have minimal backlash and high torsional stiffness, resulting in accurate motion control.
2. Misalignment Tolerance: Rigid couplings cannot tolerate misalignment between shafts. They require precise shaft alignment during installation, which can be time-consuming and may result in increased downtime during maintenance or repairs.
3. Vibration Damping: Rigid couplings offer no damping of vibrations, which means they may not be suitable for systems that require vibration isolation or shock absorption.
4. Maintenance: Rigid couplings are generally low maintenance since they have no moving parts or flexible elements that can wear out over time. Once properly installed, they can provide reliable performance for extended periods.
5. Space Requirements: Rigid couplings are compact and do not add much length to the shaft, making them suitable for applications with limited space.
6. Cost: Rigid couplings are usually more economical compared to some advanced and specialized coupling types. Their simpler design and lower manufacturing costs contribute to their affordability.
7. Application: Rigid couplings are commonly used in applications where shafts are precisely aligned and no misalignment compensation is necessary. They are prevalent in precision machinery, robotics, and applications that require accurate motion control.
In contrast, flexible couplings, such as elastomeric, jaw, or beam couplings, are designed to accommodate misalignment, dampen vibrations, and provide some degree of shock absorption. Their performance is ideal for systems where shafts may experience misalignment due to thermal expansion, shaft deflection, or dynamic loads.
In summary, rigid couplings excel in applications that demand precise alignment and high torque transmission, but they may not be suitable for systems that require misalignment compensation or vibration damping.
How Does a Rigid Coupling Handle Angular, Parallel, and Axial Misalignment?
Rigid couplings are designed to provide a fixed and rigid connection between two shafts. As such, they do not have any built-in flexibility to accommodate misalignment. Therefore, when using a rigid coupling, it is essential to ensure proper shaft alignment to avoid excessive forces and premature wear on connected equipment.
Angular Misalignment: Angular misalignment occurs when the axes of the two shafts are not collinear and form an angle with each other. Rigid couplings cannot compensate for angular misalignment, and any angular misalignment should be minimized during installation. Precision alignment techniques, such as laser alignment tools, are often used to achieve accurate angular alignment.
Parallel Misalignment: Parallel misalignment, also known as offset misalignment, happens when the axes of the two shafts are parallel but have a lateral displacement from each other. Rigid couplings cannot accommodate parallel misalignment. Therefore, precise alignment is crucial to prevent binding and excessive forces on the shafts and bearings.
Axial Misalignment: Axial misalignment occurs when the two shafts have an axial (longitudinal) displacement from each other. Rigid couplings cannot address axial misalignment. To prevent thrust loads and additional stresses on bearings, it is essential to align the shafts axially during installation.
In summary, rigid couplings are unforgiving to misalignment and require precise alignment during installation. Any misalignment in a rigid coupling can lead to increased wear, premature failure of components, and reduced overall system efficiency. Therefore, it is crucial to use appropriate alignment techniques and tools to ensure optimal performance and longevity of the connected equipment.
What is a Rigid Coupling and How Does it Work?
A rigid coupling is a type of mechanical coupling used to connect two shafts together at their ends to transmit torque and rotational motion without any flexibility or misalignment accommodation. Unlike flexible couplings, rigid couplings do not allow for angular, parallel, or axial misalignment between the shafts. The main purpose of a rigid coupling is to provide a strong and solid connection between two shafts, ensuring precise and synchronous power transmission between them.
Structure and Design:
Rigid couplings are typically made from durable materials such as steel, stainless steel, or aluminum, which can withstand high torque and load applications. The coupling consists of two halves, each with a cylindrical bore that fits tightly onto the respective shafts. The two halves are then fastened together using bolts or set screws to ensure a secure and rigid connection.
Working Principle:
The working principle of a rigid coupling is straightforward. When the two shafts are aligned precisely and the coupling is securely fastened, any torque applied to one shaft gets directly transferred to the other shaft. The rigid coupling essentially makes the two shafts act as one continuous shaft, allowing for synchronous rotation without any relative movement or play between them.
Applications:
Rigid couplings are commonly used in applications where precise alignment and torque transmission are essential. Some common applications of rigid couplings include:
- High-precision machinery and equipment
- Robotics and automation systems
- Precision motion control systems
- Machine tools
- Shaft-driven pumps and compressors
Advantages:
The key advantages of using rigid couplings include:
- High Torque Transmission: Rigid couplings can handle high torque and power transmission without any loss due to flexibility.
- Precision: They provide accurate and synchronous rotation between the shafts, making them suitable for precise applications.
- Simple Design: Rigid couplings have a simple design with minimal moving parts, making them easy to install and maintain.
- Cost-Effective: Compared to some other coupling types, rigid couplings are generally more cost-effective.
Limitations:
Despite their advantages, rigid couplings have certain limitations:
- No Misalignment Compensation: Rigid couplings cannot accommodate any misalignment between the shafts, making precise alignment during installation crucial.
- Transmits Vibrations: Since rigid couplings do not dampen vibrations, they can transmit vibrations and shocks from one shaft to the other.
- Stress Concentration: In some applications, rigid couplings can create stress concentration at the ends of the shafts.
In summary, rigid couplings are ideal for applications that require precise alignment and high torque transmission. They offer a robust and straightforward solution for connecting shafts and ensuring synchronous power transmission without any flexibility or misalignment accommodation.
editor by CX 2024-02-24
China high quality Customized Type Gear Coupling Mechanical Industry Coupling
Product Description
Customized Type Gear Coupling Mechanical Industry Coupling
Product show
| Product Name | Densen customized GIICL gear motor shaft coupling,machine shaft coupling,flexible gear coupling |
| DN mm | 16-1040mm |
| Rated Torque | 0.4~4500 kN·m |
| Allowalbe Speed | 4000~460RPM |
| Material | 45# Steel or 42CrMo |
| Application | Widely used in metallurgy, mining, engineering and other fields. |
Why Choose Us
1. One stop service:
We have 5 own factories and 50+ sub-contractors located in different areas of China to offer you one-stop manufacturing and purchasing services to help you save time and reduce procurement cost.
2. Your eyes in China:
Our commitment to quality permeates from quoting, scheduling, production, inspection to deliver into your warehouse, our QC team will remark the errors if has on QC documents for your checking before delivery as your 3rd party.
3. Your R&Dconsultant:
With professional engineers team and 29 years manufacture experience ,we would help you work out problems during new parts’ development, optimize design and recommend the most cost-effective solution.
4. Your Emergency Solver:
With continued grown factories team and our QC teams located in different areas, if customers need to expedite the delivery, we would be able to adopt another factory to produce together immediately.
5. Quality Guaranty:
No matter how long time the products delivered, we are responsible for the quality. In case the products be rejected, we would replace them or return fund according to your demand without hesitation
FAQ Q1. Are you a manufacturer or a trader?
Manufacture, we have 5 own foundries, 4 in ZheJiang Province, 1 in ZHangZhoug Province
Q2. Do you have MOQ request?
1 pcs per order is ok with us , unless material is seldom used.
Q3. If I only have a sample,without drawings, can you quote then manufacture for me?
Just send us the sample, we would have the sample simulated and measured by professional equipment then issue formal drawings for
you , at the same time, we could help you optimize the design according to your demand and related processes’ feasibility.
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Is It Possible to Replace a Shaft Coupling Without Professional Assistance?
Yes, it is possible to replace a shaft coupling without professional assistance, especially if you have some mechanical knowledge and the necessary tools. However, the ease of replacement can vary depending on the type of coupling and the complexity of the equipment. Here are some general steps to guide you through the process:
1. Safety First:
Before starting any work, ensure that the equipment is turned off and disconnected from the power source. Use appropriate personal protective equipment (PPE) to protect yourself from potential hazards.
2. Assess the Coupling Type:
Different types of couplings may have specific installation and removal methods. Identify the type of coupling you need to replace, and consult the manufacturer’s documentation or online resources for guidance.
3. Gather Tools and Materials:
Collect the necessary tools, such as wrenches, sockets, and a puller (if required), to safely remove the old coupling. Have the new coupling ready for installation, ensuring it matches the specifications of the old one.
4. Disassembly:
If your coupling is a split or clamp-style coupling, you may be able to replace it without fully disassembling the connected equipment. Otherwise, you may need to remove other components to access the coupling.
5. Remove Fasteners:
Loosen and remove any fasteners, such as set screws, that secure the old coupling to the shafts. Take care not to damage the shafts during this process.
6. Extraction:
If the old coupling is tightly fitted on the shafts, you may need to use a coupling puller or other appropriate extraction tools to safely remove it.
7. Clean and Inspect:
After removing the old coupling, clean the shaft ends and inspect them for any signs of damage or wear. Also, check for any misalignment issues that may have contributed to the old coupling’s failure.
8. Install New Coupling:
Follow the manufacturer’s instructions for installing the new coupling. Apply appropriate lubrication and ensure the coupling is correctly aligned with the shafts.
9. Fasten Securely:
Tighten the fasteners to the manufacturer’s recommended torque values to securely attach the new coupling to the shafts.
10. Test Run:
After installation, perform a test run of the equipment to ensure the new coupling operates smoothly and without issues.
While it is possible to replace a shaft coupling without professional assistance, keep in mind that some couplings and equipment may require specialized knowledge and tools for safe and proper replacement. If you are uncertain about the process or encounter any difficulties, it is advisable to seek help from a qualified professional or technician to avoid potential damage to the equipment or injury to yourself.
“`
How to Identify Signs of Wear or Failure in a Shaft Coupling
Regular inspection and monitoring are essential to identify signs of wear or potential failure in a shaft coupling. Detecting issues early can help prevent costly downtime and equipment damage. Here are common signs to look for:
1. Visible Damage:
Inspect the coupling for visible signs of damage, such as cracks, chips, or deformation. These can indicate mechanical stress or overload.
2. Abnormal Noise or Vibration:
Unusual noise or excessive vibration during operation may indicate misalignment, worn-out components, or a coupling nearing its failure point.
3. Increased Temperature:
If the coupling becomes noticeably hotter during operation than usual, it could be a sign of friction or misalignment issues.
4. Shaft Misalignment:
Check for misalignment between the shafts connected by the coupling. Misalignment can lead to increased stress on the coupling and its components.
5. Excessive Backlash:
If the coupling exhibits too much free play or rotational play before torque transmission, it might indicate wear or fatigue in the coupling’s components.
6. Lubrication Issues:
Inspect the coupling for lubrication leaks or insufficient lubrication, which can lead to increased friction and wear.
7. Elastomeric Element Deterioration:
If the coupling uses elastomeric elements (e.g., rubber or polyurethane), check for signs of deterioration, such as cracking, softening, or deformation.
8. Bolts and Fasteners:
Examine the bolts and fasteners connecting the coupling components. Loose or damaged bolts can lead to misalignment and coupling failure.
9. Age and Service Life:
Consider the age and service life of the coupling. If it has been in use for a long time or exceeds the manufacturer’s recommended service life, it may be more susceptible to wear and failure.
10. Abnormal Performance:
Monitor the overall performance of the connected equipment. Any abnormal behavior, such as reduced power transmission or erratic operation, could be indicative of coupling issues.
If any of these signs are observed, it’s crucial to take immediate action. Depending on the severity of the issue, this may involve replacing worn components, realigning the shafts, or replacing the entire coupling. Regular maintenance and periodic inspections are key to identifying these signs early and ensuring the coupling operates optimally and safely.
“`
Types of Shaft Couplings and Their Applications in Various Industries
Shaft couplings come in various types, each designed to meet specific application requirements and address different types of misalignment. Here are some common types of shaft couplings and their applications in various industries:
1. Jaw Couplings:
Applications: Jaw couplings are widely used in power transmission applications, including conveyor systems, pumps, compressors, and industrial machinery. They are suitable for moderate torque requirements and provide good misalignment compensation.
2. Gear Couplings:
Applications: Gear couplings are used in heavy-duty industrial applications such as steel mills, paper mills, and mining equipment. They offer high torque capacity and can handle significant misalignments.
3. Disc Couplings:
Applications: Disc couplings are commonly used in precision machinery and automation systems, such as printing presses, machine tools, and robotics. They provide excellent torsional stiffness and are ideal for applications requiring precise positioning.
4. Grid Couplings:
Applications: Grid couplings are used in various industrial applications, including fans, pumps, and compressors. They offer high torque capacity and good shock absorption.
5. Oldham Couplings:
Applications: Oldham couplings are used in applications requiring high misalignment compensation, such as stepper motor drives and motion control systems.
6. Diaphragm Couplings:
Applications: Diaphragm couplings are used in critical applications that demand high torque transmission accuracy, such as aerospace, medical equipment, and semiconductor manufacturing.
7. Elastomeric Couplings:
Applications: Elastomeric couplings, like spider couplings, find applications in general industrial machinery, HVAC systems, and conveyor systems. They provide damping properties and flexibility to accommodate misalignments.
8. Torsionally Rigid Couplings:
Applications: Torsionally rigid couplings are used in applications requiring precise torque transmission, such as precision machining equipment and high-speed spindles.
9. Fluid Couplings:
Applications: Fluid couplings are used in heavy machinery and drivetrains, such as mining equipment, crushers, and marine propulsion systems. They provide smooth acceleration and dampening of shock loads.
10. Magnetic Couplings:
Applications: Magnetic couplings are used in applications where hermetic sealing is required, such as chemical processing, pumps, and mixers. They allow for torque transmission without direct physical contact.
The selection of the appropriate shaft coupling type depends on factors such as torque requirements, speed, misalignment, operating conditions, and the specific needs of the application. Using the right coupling ensures efficient power transmission, protects equipment from misalignment-related issues, and enhances the overall reliability and performance of industrial machinery and systems.
“`
editor by CX 2024-02-17
China Custom Custom Wgp Type Drum Gear Tooth Coupling Curved Tooth Pump Rigid Gear Coupling
Product Description
Custom WGP Type Drum Gear Tooth Coupling Curved Tooth Pump Rigid gear coupling
Product Description
WGP Drum Gear Coupling With Brake Disc has a brake disc, brake disc can rotate speed by controlling the speed to adjust the machine. As shown in figure WGP with brake drum set type gear coupling is divided into I type and II type 2 forms, the only difference is that the brake disc is different.
Characteristics
1. Strong load-bearing capacity. Under the same outer diameter of the inner gear sleeve and the maximum outer diameter of the coupling, the bearing capacity of the drum gear coupling is increased by an average of 15-20% compared to the straight gear coupling;
2. The angular displacement compensation is large. When the radial displacement is equal to zero, the allowable angular
displacement of the straight tooth coupling is 1o, while the allowable angular displacement of the drum tooth coupling is 1o30 ‘, an increase of 50%. Under the same modulus, number of teeth, and tooth width, the allowable angular displacement of drum shaped teeth is greater than that of straight teeth;
3. The drum shaped tooth surface improves the contact conditions between the inner and outer teeth, avoiding the drawbacks of extrusion and stress concentration at the edge of straight teeth under angular displacement conditions. At the same time, it improves the friction and wear conditions of the tooth surface, reduces noise, and has a long maintenance cycle;
4. The outer gear sleeve has a CHINAMFG shaped tooth end, making it very convenient to assemble and disassemble the inner and outer teeth;
5. Transmission efficiency up to 99.7%;
Based on the above characteristics, drum shaped teeth have been widely used domestically and internationally to replace straight tooth couplings.
Product Parameters
Application
Belt conveyers, csraper conveyers, and conveyers of all kinds Bucket elevators, ball mills, hoisters, crushers, excavators, mixers, straighteners, cranes, etc.
Packaging & Shipping
Company Profile
HangZhou CHINAMFG machinery technology Co., Ltd is an industry transmission solutions manufacuturer and service provider.
We offer 1 stop solution for power transmission products for different factories, such as chemicals, energy, material handling, environmental, extraction, pulp and paper, steel and metal, food and beverage, and construction industries.
We supply: Customised gears, Small gearmotors, Industrial gearboxes, Motors, Brand product sourcing.
Our industrial Gear, Gearbox, gearmotor and motor are sold to more than 30 countries. High quality, good price, in time response and sincere service are our value and promises. We aim at making happy cooperation with our customers, bring them reliable and comfortable service.
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
How Do Rigid Couplings Compare to Other Types of Couplings in Terms of Performance?
Rigid couplings offer specific advantages and disadvantages compared to other types of couplings, and their performance depends on the requirements of the application:
1. Performance: Rigid couplings provide excellent torque transmission capabilities and are best suited for applications that demand precise and efficient power transfer. They have minimal backlash and high torsional stiffness, resulting in accurate motion control.
2. Misalignment Tolerance: Rigid couplings cannot tolerate misalignment between shafts. They require precise shaft alignment during installation, which can be time-consuming and may result in increased downtime during maintenance or repairs.
3. Vibration Damping: Rigid couplings offer no damping of vibrations, which means they may not be suitable for systems that require vibration isolation or shock absorption.
4. Maintenance: Rigid couplings are generally low maintenance since they have no moving parts or flexible elements that can wear out over time. Once properly installed, they can provide reliable performance for extended periods.
5. Space Requirements: Rigid couplings are compact and do not add much length to the shaft, making them suitable for applications with limited space.
6. Cost: Rigid couplings are usually more economical compared to some advanced and specialized coupling types. Their simpler design and lower manufacturing costs contribute to their affordability.
7. Application: Rigid couplings are commonly used in applications where shafts are precisely aligned and no misalignment compensation is necessary. They are prevalent in precision machinery, robotics, and applications that require accurate motion control.
In contrast, flexible couplings, such as elastomeric, jaw, or beam couplings, are designed to accommodate misalignment, dampen vibrations, and provide some degree of shock absorption. Their performance is ideal for systems where shafts may experience misalignment due to thermal expansion, shaft deflection, or dynamic loads.
In summary, rigid couplings excel in applications that demand precise alignment and high torque transmission, but they may not be suitable for systems that require misalignment compensation or vibration damping.
What Industries Commonly Use Rigid Couplings for Power Transmission?
Rigid couplings are widely used in various industries for power transmission applications that require a solid and reliable connection between rotating shafts. Some of the industries that commonly utilize rigid couplings include:
- Manufacturing: In the manufacturing industry, rigid couplings are employed in a wide range of equipment, such as conveyors, mixers, pumps, compressors, and machine tools. These couplings ensure precise power transmission and alignment, making them ideal for maintaining accuracy in manufacturing processes.
- Material Handling: Material handling equipment, including cranes, hoists, and elevators, often rely on rigid couplings to transfer power between shafts efficiently. Rigid couplings provide a robust connection that can handle the heavy loads and continuous operation common in material handling applications.
- Automotive: The automotive industry employs rigid couplings in various automotive systems, including drive shafts, transmissions, and steering systems. Rigid couplings contribute to the overall performance and reliability of these components, ensuring smooth power transfer and minimizing vibration.
- Mining and Construction: In the mining and construction industries, rugged and durable power transmission components are crucial. Rigid couplings are used in equipment like crushers, mills, and heavy-duty conveyors, where they can withstand the harsh conditions and heavy loads commonly found in these applications.
- Oil and Gas: The oil and gas industry often utilizes rigid couplings in pumps, compressors, and drilling equipment. Rigid couplings offer consistent and dependable power transmission, which is essential for critical operations in this sector.
- Marine: In marine applications, such as ship propulsion systems and marine pumps, rigid couplings are used to transmit power between the ship’s engine and various equipment. They can handle the dynamic forces and vibrations encountered in marine environments.
- Aerospace: In aerospace applications, where precision and reliability are paramount, rigid couplings play a role in power transmission between various aircraft components.
Rigid couplings are chosen in these industries for their ability to maintain shaft alignment, resist misalignment, and provide a backlash-free connection. Their robust construction and simple design make them suitable for high torque and high-speed applications, where precision and efficiency are crucial.
Limitations and Disadvantages of Using Rigid Couplings:
Rigid couplings offer several advantages in providing a strong and direct connection between shafts, but they also have certain limitations and disadvantages that should be considered in certain applications:
- No Misalignment Compensation: Rigid couplings are designed to provide a fixed connection with no allowance for misalignment between shafts. As a result, any misalignment, even if slight, can lead to increased stress on connected components and cause premature wear or failure.
- Transmit Shock and Vibration: Rigid couplings do not have any damping or vibration-absorbing properties, which means they can transmit shock and vibration directly from one shaft to another. In high-speed or heavy-duty applications, this can lead to increased wear on bearings and other components.
- No Torque Compensation: Unlike flexible couplings, rigid couplings cannot compensate for torque fluctuations or angular displacement between shafts. This lack of flexibility may not be suitable for systems with varying loads or torque requirements.
- Higher Stress Concentration: Rigid couplings can create higher stress concentration at the points of connection due to their inflexibility. This can be a concern in applications with high torque or when using materials with lower fatigue strength.
- More Challenging Installation: Rigid couplings require precise alignment during installation, which can be more challenging and time-consuming compared to flexible couplings that can tolerate some misalignment.
- Increased Wear: The absence of misalignment compensation and vibration absorption can lead to increased wear on connected components, such as bearings, shafts, and seals.
- Not Suitable for High Misalignment: While some rigid couplings have limited ability to accommodate minor misalignment, they are not suitable for applications with significant misalignment, which could lead to premature failure.
Despite these limitations, rigid couplings are still widely used in many applications where precise alignment and a strong, permanent connection are required. However, in systems with significant misalignment, vibration, or shock loads, flexible couplings may be a more suitable choice to protect the connected components and improve overall system performance and longevity.
editor by CX 2024-02-09
Large China in Batam Indonesia falk 1020g20 near me shop Household in Gwangju Republic of Korea gear type coupling shop Appliances Shell PP PE PS ABS Shredder Plastic Recycling Crusher for Sales with top quality lowest price
We – EPG Group the biggest couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/
Large Household Appliances Shell PP PE PS ABS Shredder Plastic Recycling Crusher for Sales
Descriptions
The DGX Heavy Duty Single Shaft Shredder has a 750mm diameter profiled rotor made of solid steel, operating at a speed of 45rpm. The concave ground, aggressive 4-way rotating knives are mounted in the grooves of the profiled rotor with special knife holders. This enables a reduction of the cutting gap between the counter knives and the rotor which guarantees a high flow rate, low power consumption and maximum output of shredded material.
The hydraulically operated ram feeds the material automatically in the rotor’s cutting chamber by load-related controls. The hydraulic system is equipped with high-pressure valves and volumetric flow controls which can be set according to the requirements of the input material.
Extremely robust pedestal bearing housings are mounted outside the machine and separate to the cutting chamber to prevent dust and dirt penetrating into the oversized bearings. This ensures a long service life and minimum service and maintenance.
Power is transmitted from the motor by a drive belt via an oversized gearbox which is located on the shaft end on one end of the rotor.
A safety switch prevents machine startup when the front panel is open and the machine features emergency stop buttons on the machine body and control panel.
Specificatoins
Layout
Features
- Large diameter flat rotor
- Machined pocket knife holders
- Optional hard facing
- Concave ground square knives
- Robust ram construction
- Heavy duty guide bearings
- Universal couplings
- Low speed, high torque geared drive
- Powerful hydraulic swing type ram
- Reduced footprint – (compared to horizontal pusher designs)
- Bolt in drive shafts
- Multiple rotor designs
- Two speed hydraulic system
- Oil cooling on ram and gearbox
- Ram comb plate
- Amp meter control
Options
- Hydraulic screen cradle
- Gearbox with shrink disc
- Rotor cooling
- Pipe spacer
- Touch screen PLC Hopper mounted viewing mirror
- Increased motor drive
- Hydraulic drive
- Bespoke colour scheme Turbo hydraulics
- Housing wear plates
- Sound absorbing hopper
Applitions
- PLASTICS
- RUBBER
- WOOD
- BIOMASS
- PAPER
- ALTERNATIVE FUELS (RDF/SRF)
- DOMESTIC & COMMERCIAL WASTE
Suppliers
Certificates
All of our shredders and granulators have been approved CE certification.
Packaging & Loading
1. Several layers of plastic wrapping film and cardboard to protect plastic recycling machine from dust and moisture.
2. Plastic packing strap belt to fasten wrapping film and machines, also to fix machines in containers.
3. Wooden case is used as the outside package and spare parts when choosing by LCL, air or international express.
4. Excellant logistic team to guarantee the shredder and granulator machines to be safely shipped to customer appointed loaction.
5. If you have any other request for the packaging or loading, we will try our best to meet your demands.
FAQ
Q1: Are you a trading company or a factory ?
DGM is a Factory with 10 years experience in machinery manufacturing, and 20 years experience in technology.
Q2: Will we provide pre-sale services?
DGM consists of experienced specialists, we will offer a suitable solution according client’s requirement in time.
Q3: Is our after-sales service excellent?
At DGM we have a highly trained team of service personnel to handle all manner of customer service enquiries. Whether it is EPT parts, technical assistance, or just general operation advice we offer our customers genuine 24/7 support and after sale service.
We have an international network which ensures wherever you are in the world you receive localized high level support.
Our technical team has decades of experience in the field of size reduction and recycling and we are on hand to offer assistance in installation, commissioning, staff training and general technical assistance.
Q4: Where is your factory?
Address: No.1.Fengqi Road, Xihu (West Lake) Dis. District , HangZhou City, ZheJiang Province, China
Q5: what is your contact informatoin?
Fax: 0086-571-88220971: +86 510 8357 5710
Telephone: +86 510 8357 2002
Mobile/ +86 18762812155
Q6: Could we visit your factory and test the machine?
We warmly welcome you to visit our factory anytime,and we are very glad to test our machine with your raw material.
/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed EPT parts contained herein are not sponsored, approved, or manufactured by the OEM.
/
Cbhz-F40 China in Port Harcourt Nigeria gear coupling hub factory Type in Nnewi Nigeria zapex coupling supplier Single Gear Pump for Forklift with top quality lowest price
We – EPG Group the biggest couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/
Specification :
| Model | OUTPUT(ML/R) | RATED PRESSURE | MAX PRESSURE | WEIGHT |
| CBHZ-F25 | 25 | 20MPA | 25MPA | 4.7 |
| CBHZ-F28.2 | 28.2 | 4.9 | ||
| CBHZ-F30 | 30 | 5.1 | ||
| CBHZ-F32 | 32 | 5.3 | ||
| CBHZ-F36 | 36 | 5.7 | ||
| CBHZ-F40 | 40 | 6.1 |
Note: The dimensions of Shaft, Mounting, Coupling, Inlet&Outlet can be customized.
| Engine Parts | complete engine, cylinder block & head, crankshaft, camshaft, connecting rod & bearing, liner/repair kit, piston kit, gasket set, intake & exhaust valve, fuel pump, valve seal, water pump, Turbocharger, etc. |
| Hydraulic Parts | hydraulic / main pump, swing motor, final drive, gearbox, control valve, pump spare parts, etc. |
| Undercarriage Parts | track link, top / bottom roller, front idler, sprocket, teeth, pin, rubber track, etc. |
| Seal Kit | arm/boom/bucket cylinder sesal kit, adjuster cylinder seal kit, O-ring box, gear pump seal kit, swing/travel motor seal kit, etc. |
| EPT Part | senor, alternator/generator, filter, clutch, controller/ECU/monitor/computer board, solenoid valve, roller bearing, starter/starting motor, etc. |
| Other | radiator/water tank, hydraulic oil cooler, breakers seal kit, fuel transfer pump, grease gun, etc. |
General Order Process:
*Step1: Contact us by online, Email ,skype ,WhatsApp
*Step2: We discuss prices, lead time, payment terms, shipping mode, packing.
*Step3: Issuing PI for you and you confirm .
*Step4: Arrange payment
*Step5: Delivery
*Step6: Goods reach you.
*Step7: After-sale service special for you.
/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed EPT parts contained herein are not sponsored, approved, or manufactured by the OEM.
/
Stainless China in Hamadan Iran (Islamic Republic of) gear coupling near me shop Steel in Huambo Angola sew eurodrive coupling near me shop Industrial Union Welded Quick Coupling Camlock E Type Adapter Fittings with top quality lowest price
We – EPG Team the greatest couplings and gears manufacturing facility in China with five distinct branches. For far more information: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828 /
Stainless Steel Industrial Union Welded Quick Coupling Camlock E Kind Adapter Fittings(HW-AT 1007)
Our website:
.
Standard: 3A, DIN, etc
Casting technique: die-casting, gravity casting, sand casting
Size: one/2″ to 8″
Human body content: 201, SS304, SS316L (Heat handled if need to have)
Cam arm content: Stainless Metal
Assembly: Entire body+ Gasket+ Handles+ Metal Pins+ Metal Pull Rings+ Metal Protection Clips
Gasket substance: Silicone, PTFE, EPDM, and so on
Application: Drinking water, gasoline, oil, foodstuff processing or industrial processing.
We have ten a long time exporting encounter and our clients are from numerous of nations in the entire world.
We think about our consumers as our close friends and households!
We also create gate valves, world valves, filters, verify valves, angle seat valves, pipe fittings, clamps, sight glass, precision castings and other merchandise…
We are devoted in establishing EPT and better goods and persistently fulfill our customers’ satisfaction.
Your good results is our business!
Products parameters
Our business overview
ZHangZhoug EPT Valve & Fittings Co., Ltd. is a higher- EPT valve enterprise maily making piece ball valves, flanged ball valves, 3-way ball valves, gate valves, globe valves, filters, check out valves, pneumatic EPT valves, pneumatic angle seat valves, precision casting, fittings and other items. The merchandise can be manufactured according to GB, API, ANSI and BS requirements according to different requirements. The supplies are carbon steel, stainless steel, reduced temperature metal, alloy metal, large temperature resistant, ultra higher temperature specific steel, and so on transmission approaches can be selected manually, worm gear transmission, pneumatic, hydraulic, electrical, and so on.
We constantly takes higher good quality and honesty as the major line, and adhere to our business philosophy of “honesty, client first”. We will proceed to use new technologies, processes and supplies, and actively create new versions to supply higher-high quality valve products and much better long term servise.
Our items
Our manufacturing machines
Our warehouse
Exhibitions
FAQ
one. Could you produce EPT merchandise?
Yes, we could do different EPT valves conform to demand drawing or sample.
two. How to ensure the valve quality? ?
A. Firstly, we examine the casting when get it a single by one and will abandon it if defect castings. This sort of as blowholes&pinholes is defects castings.
B. We will inspect and verify about valve dimension right after machining. Allowable mistake to standard is one.5mm for longth(previously mentioned DN50 valves)
C. All things must be inspected by hydraulic test soon after assemble. And far more important make sure that valves are inspected by operator in in accordance with hydraulic test criteria including force&time.
D. Coat oil for anti-rust inside of the valve body and paint checking.
three. How is your valve guarantee interval?
Generally, the warranty period for valves is fourteen monthes, nevertheless, we will remedy or replace new valves when find fault things to our outdated inventory buyers no issue how prolonged.
/ The use of unique tools manufacturer’s (OEM) portion numbers or trademarks , e.g. CASE® and John Deere® are for reference needs only and for indicating product use and compatibility. Our organization and the listed EPT elements contained herein are not sponsored, approved, or manufactured by the OEM. /
Hongwang China in Madrid Spa in elecon coupling sales Stainless in Khabarovsk Russian Federation maina gear coupling Steel Industrial Sanitary Union Quick Coupling Male Threaded Camlock Pipe Fitting-B Type Adapter with top quality lowest price
We – EPG Team the biggest couplings and gears factory in China with five diverse branches. For far more particulars: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828 /
EPT Stainless Steel Industrial/Sanitary Union Quick Coupling Male Threaded Camlock Pipe Fitting-B Type Adapter (HW-AT 1002)
Our web site:
.
Standard: 3A, DIN, etc
Casting strategy: die-casting, gravity casting, sand casting
Dimension: 1/two” to 8″
Entire body materials: 201, SS304, SS316L (Heat handled if need to have)
Cam arm material: Stainless Steel
Assembly: Physique+ Gasket+ Handles+ Steel Pins+ Metal Pull Rings+ Metal Security Clips
Gasket materials: Silicone, PTFE, EPDM, etc
Thread: NPT, BSP(typically woman thread is BSPP, male thread is BSPT)
Application: Drinking water, gas, oil, food processing or industrial processing.
We have ten several years exporting expertise and our buyers are from numerous of nations in the globe.
We consider our customers as our close friends and family members!
We also produce gate valves, world valves, filters, check out valves, angle seat valves, pipe fittings, clamps, sight glass, precision castings and other products…
We are devoted in developing EPT and far better items and persistently satisfy our customers’ gratification.
Your accomplishment is our organization!
Goods parameters
Our business overview
ZHangZhoug EPT Valve & Fittings Co., Ltd. is a higher- EPT valve business maily generating piece ball valves, flanged ball valves, 3-way ball valves, gate valves, world valves, filters, check out valves, pneumatic EPT valves, pneumatic angle seat valves, precision casting, fittings and other items. The items can be manufactured in accordance to GB, API, ANSI and BS expectations according to distinct specifications. The materials are carbon steel, stainless steel, lower temperature steel, alloy metal, higher temperature resistant, extremely higher temperature specific metal, and so on transmission approaches can be chosen manually, worm equipment transmission, pneumatic, hydraulic, electric, and so forth.
We often will take substantial quality and honesty as the primary line, and adhere to our business philosophy of “honesty, buyer 1st”. We will carry on to use new technologies, processes and materials, and actively build new versions to give substantial-good quality valve goods and better potential servise.
Our products
Our creation equipment
Our warehouse
Exhibitions
FAQ
one. Could you generate EPT product?
Yes, we could do different EPT valves conform to require drawing or sample.
2. How to ensure the valve top quality? ?
A. Firstly, we examine the casting when get it one by one particular and will abandon it if defect castings. These kinds of as blowholes&pinholes is defects castings.
B. We will inspect and verify about valve dimension right after machining. Allowable mistake to regular is one.5mm for longth(over DN50 valves)
C. All things have to be inspected by hydraulic examination right after assemble. And much more essential ensure that valves are inspected by operator in according with hydraulic test criteria including pressure&time.
D. Coat oil for anti-rust within of the valve human body and paint examining.
3. How is your valve guarantee interval?
Typically, the guarantee time period for valves is fourteen monthes, nonetheless, we will remedy or exchange new valves after find fault objects to our previous stock clients no issue how extended.
/ The use of authentic equipment manufacturer’s (OEM) element quantities or emblems , e.g. CASE® and John Deere® are for reference purposes only and for indicating solution use and compatibility. Our firm and the shown EPT elements contained herein are not sponsored, authorized, or produced by the OEM. /
Conveyor China in Shimkent Kazakhstan gear type coupling price Chain in Al-A in United Arab Emirates teflon gear coupling near me with Special Extended Pins with top quality lowest price
We – EPG Team the most significant couplings and gears manufacturing unit in China with five diverse branches. For more particulars: Cellular/whatsapp/telegram/Kakao us at: 0086-13083988828 /
EPT Chain Team is the most expert manufacturer of electricity transmission in China, producing roller chains, business sprockets, motorbike sprockets, casting sprockets, distinct sort of couplings, pulleys, taper bushes, locking units, gears, shafts, CNC precision elements and so on. We have handed ISO9001, ISO14001, TS16949 such high quality and enviroment certification.
Conveyor Chain with Specific Extended Pins
Unique prolonged pin roller chains for conveyor
C45 metal or casting iron
Different surface area treatment method as per customer’s demand from customers
Brand name: OEM
Product Quantity: Buyer made
Application: Equipment
Normal: JIS, DIN, KANA ISO, GB
Proces: Resin Sand Casting
Certification: ISO9001: 2000
Packing and Transport
1, Standard picket carton and pallet for exporting
two, Delivery: As per contract shipping and delivery on time.
3, Transport: As for every shopper request, We can take CIF, FOB, CFR and so on.
Or Consumer Licensed Agent, we supply all the necessary assistant
Quality management:
(1) Machinery houses and Chemical factors tests soon after uncooked casting
(two)Hardness examining
(three)Proportions screening
(four)Prevailing microstructure screening
Our Edge:
one) EPT enginnering group make higher top quality
2) OEM provider in casting
3) ISO9001: 2000 quality handle and ISO14000 EPT safety
four) All normal and particular size are obtainable with drawing
five) Very own check tools and specialist casting mould growth
six) Best support
| Product name | Conveyor Chain with Particular Prolonged Pins |
| Materials Available | 1. Stainless Steel: SS201, SS303, SS304, SS316, SS416, SS420 |
| 2. Steel:C45(K1045), C46(K1046),C20 | |
| 3. Brass:C36000 ( C26800), C37700 ( HPb59), C38500( HPb58), C27200(CuZn37), C28000(CuZn40) | |
| 4. Bronze: C51000, C52100, C54400, etc | |
| five. Iron: 1213, 12L14,1215 | |
| 6. Aluminum: Al6061, Al6063 | |
| 7.OEM according to your request | |
| Area Therapy | Annealing, natural anodization, heat treatment, polishing, nickel plating, chrome plating, znic plating,yellow passivation, gold passivation, satin, Black surface painted etc. |
| Products Available | sprockt chains, pulley, shafts(axles, spline shafts, dart shafts),gears (pinions, wheels gear rack) bearing, bearing seat, bushing, coupling, lock assembly and so on. |
| Processing Method | CNC machining, punch,turning, milling, drilling, grinding, broaching, welding and assembly |
| QC : | Technicians self-check in production,closing-examine just before deal by expert High quality inspector |
| Dimensions | Drawings |
| Package | Picket Scenario/Container and pallet, or as per customized specifications |
| Certificate | ISO9001:2008 , ISO14001:2001,ISO/TS 16949:2009 |
| Benefit | High quality first Services outstanding , Innovative gear,Knowledgeable employees,Ideal screening gear |
| Lead Time | fifteen-25days samples. 30-45days offcial order |
/ The use of unique tools manufacturer’s (OEM) portion figures or emblems , e.g. CASE® and John Deere® are for reference functions only and for indicating item use and compatibility. Our organization and the shown EPT elements contained herein are not sponsored, authorized, or manufactured by the OEM. /
American China in Chihuahua Mexico rathi gear coupling shop Screw in Ikorodu Nigeria teflon gear coupling near me Type Ring Clamps for Hoses with top quality lowest price
We – EPG Team the largest couplings and gears manufacturing unit in China with 5 various branches. For far more specifics: Cell/whatsapp/telegram/Kakao us at: 0086-13083988828 /
EPG Equipment Industries Quality is at middle stage, in every single activity–right from uncooked content procurement, materials inward system, Lab screening, materials handling and accounting, identification/traceability, storing & preservation, processing , packing , forwarding and dispatch. In every single sphere of operation, quality is certain to the hilt. With the ongoing attempt for top quality and shipping and delivery with cost successful remedies, we have become most desired business associates to numerous world-course makers. equipment coupling catalogue pdf We are searching forward to developing successful enterprise interactions with new consumers close to the planet in the potential. American sort hose clamp description
1) Item name: American type hose clamp
2) Strip: Perforated
3) Bandwidth: 8mm and 12.7mm
four) Thickness: .6mm for W2 and W4
.7mm for W1
five) Torque(N.m): 8mm bandwidth ≥2.5N.m
12.7mm bandwidth ≥7.5N.m
6) Screw: Slotted and corssed, made by our own plant.
seven) Diameter measurement: eight-12mm to up
8) Framework: Worm Drive
nine) Package deal: Inside plastic bag or box, outside cartons and pallteized.
ten) Shipping and delivery Time: About 30 times for each 20’GP
11) Materials as follows:
| W1 | All the components are galvanized metal |
| W2 | Band and housing are stainless steel, screw is galvanizied. |
| W4 | All the elements are stainless steel |
| W5 | All the parts are ss316 |
Major Items
HOSE CLAMP PLANT Check out
HOSE CLAMP Shipping
HOSE CLAMP Application
*all types of autos
*development
*hearth handle, textile equipments
*the gasoline motor
*the diesel engine
*sprinkler irrigation equipment
*mechanical products
*the hose outlet gasoline and heating
Why pick us?
one) We are a true manufacture of hose clamp for more than ten years, can supply you skilled service and excellent price tag.
two) Having R&D and QC team, we can give you substantial certified hose clamp.
3) Our personal screw plant to make sure it is correct 100% best for our clamps.
four) Higher effectiveness sales crew offer 7/24 services on the web.
FAQ:
Q: Are you trading business or manufacture?
A: We are manufacturing unit found in Yuanmengkou Business Park, XiHu (West Lake) Dis.Hu (West Lake) Dis., ZheJiang City, China.
Q: How lengthy is your supply time?
A: In five days if we have stock, usally it takes about 30days for 1 20’GP container.
Q: Do you offer samples? Is it cost-free or additional?
A: Sure, we could supply the sample for totally free charge but do not shell out the price of freight.
Q: What is your phrases of payment?
A: Payment =1000USDm 30% T/T in progress, stability prior to shipment or against BL copy. Or L/C at sight.
For far more information, remember to speak with me online or ship e mail. Thank you.
/ The use of authentic equipment manufacturer’s (OEM) component quantities or trademarks , e.g. CASE® and John Deere® are for reference functions only and for indicating product use and compatibility. Our firm and the listed substitution areas contained herein are not sponsored, approved, or produced by the OEM. /
Flexible China in Songkhla Thailand flexible gear near me shop Coupling in Genoa Italy helical flexible shaft coupling manufacturer Bowex Type Rotext Type ALS Model with top quality lowest price
We – EPG Group the most significant couplings and gears manufacturing unit in China with five different branches. For far more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828 /
The right producer will not only offer the merchandise you seek out but will also offer them at a substantial good quality in your price range and offer acceptable shipping options. Also, observe that some companies create couplings for many various apps, although other folks focus in couplings for automotive use (e.g. flywheel couplings, torque limiters, driveshafts, tyre couplings, and many others.) or industry-specific equipment. The correct kind of company for you in this regard will depend on the specifics of your application. Bearing all of this in brain, get to looking, and pleased searching! China lubrication of coupling Our items are used in several fields. Nylon Sleeve Gear Coupling
Curved-tooth Coupling / Coupling BoWex
Ubet Nylon Sleeve Couplings fleXiHu (West Lake) Dis.ble shaft connections for a constructive torque transmission and particularly suitable to compensate for aXiHu (West Lake) Dis.al, radial and angular shaft misalignment.
Ubet Nylon Sleeve Couplings are compact and demand no lubrication. They are tailored to a lot of applications incXiHu (West Lake) Dis.Hu (West Lake) Dis. vertical and blind installations. They operate over a vast variety of temperature at speed up to five,000 RPM. This kind of coupling is commonly utilized in software this kind of as Motor, Generator and Pump etc.
Features:
l Nylon-steel combined, routine maintenance cost-free
l Payment for aXiHu (West Lake) Dis.al, radial and angular misalignment
l Hassle-free aXiHu (West Lake) Dis.al plugging assembly
l Without bolts, pins, flanges to influence equilibrium or safety
l No necessity of lubrication
l ExcellentEPTinsulation
l Can be vertically or horizontally assembled
l Tolerance of finished bore in equipment with ISOH7
| l tem No. | l Product No. | l Concluded bore range | l Outdoors Diameter | l Nominal Torque Nm |
| l UTNL-fourteen | l UTNL-fourteen-L | l 6-fourteen | l 40 | l ten |
| l UTNL-19 | l UTNL-19-L | l 8-19 | l 48 | l sixteen |
| l UTNL-24 | l UTNL-24-L | l 10-24 | l 52 | l 20 |
| l UTNL-28 | l UTNL-28-L | l ten-28 | l 66 | l forty five |
| l UTNL-32 | l UTNL-32-L | l 12-32 | l 76 | l sixty |
| l UTNL-38 | l UTNL-38-L | l 14-38 | l eighty three | l 80 |
| l UTNL-42 | l UTNL-42-L | l 20-forty two | l 95 | l one hundred |
| l UTNL-48 | l UTNL-forty eight-L | l twenty-48 | l 114 | l 140 |
| l UTNL-fifty five | l UTNL-fifty five-L | l twenty five-fifty five | l 132 | l 240 |
| l UTNL-65 | l UTNL-65-L | l 25-sixty five | l 175 | l 380 |
/ The use of first tools manufacturer’s (OEM) element figures or logos , e.g. CASE® and John Deere® are for reference functions only and for indicating solution use and compatibility. Our company and the outlined replacement areas contained herein are not sponsored, approved, or produced by the OEM. /